Here’s how the London Porter brewers ranked in the 1830’s:
Largest London Porter breweries 1830 - 1839 | ||||||||||
Brewery | 1830 | 1831 | 1832 | 1833 | 1834 | 1835 | 1836 | 1837 | 1838 | 1839 |
Barclay Perkins | 262,306 | 330,528 | 343,328 | 315,784 | 343,569 | 382,063 | 378,109 | 354,360 | 375,466 | 405,819 |
Whitbread | 144,104 | 191,040 | 209,672 | 187,070 | 184,100 | 186,206 | 190,005 | 180,512 | 179,975 | 183,468 |
Truman | 167,542 | 199,486 | 234,665 | 226,924 | 254,650 | 280,075 | 329,333 | 303,590 | 310,193 | 320,675 |
Reid | 127,220 | 154,631 | 165,515 | 150,865 | 169,246 | 181,187 | 194,656 | 162,840 | 178,919 | 171,650 |
Sources: | ||||||||||
Whitbread brewing log held at the London Metroploitan Archives, document number LMA/4453/D/09/023. | ||||||||||
“The British Brewing Industry 1830-1980”. T R Gourvish & R G Wilson, 1994, pages 610-612 |
This is a pretty typical Porter of the time. With the familiar combination of pale, brown and black malts. All pretty locally sourced. The pale was from Sussex, the brown from Hertfordshire. The hops were all pretty local, too: Mid Kents from the 1835 and 1836 crop.
As a third of the hops were over two years old, I’ve knocked the total hops down from 4.62 ozs. to 3.75 ozs. It still leaves a calculated 44 IBUs.
The mashing scheme was quite complicated: three mashes and no sparge. There was a fourth mash for a return wort.
action | water (barrels) | water temp. | tap temp. | time |
mash | 207 | 162º F | 145º F | 90 |
mash | 150 | 180º F | 164º F | 50 |
mash | 179 | 151º F | 153º F | 40 |
This was a beer that wasn’t vatted and would have been drunk young. Or perhaps blended with Keeping porter at racking time. As with all Porter and Stout, the fermentation was quite hot, hitting a maximum temperature of 78.5º F.
1837 Reid P | ||
pale malt | 11.75 lb | 79.66% |
brown malt | 2.25 lb | 15.25% |
black malt | 0.75 lb | 5.08% |
Goldings 90 mins | 1.25 oz | |
Goldings 60 mins | 1.25 oz | |
Goldings 30 mins | 1.25 oz | |
OG | 1061.2 | |
FG | 1018 | |
ABV | 5.72 | |
Apparent attenuation | 70.59% | |
IBU | 44 | |
SRM | 30 | |
Mash at | 150º F | |
Sparge at | 165º F | |
Boil time | 75 minutes | |
pitching temp | 66º F | |
Yeast | Wyeast 1099 Whitbread Ale |
When they did these multiple mashes were the first runnings pulled off and then the next addition(s) of water added... or were the subsequent additions just added to the whole mash?
ReplyDeleteKevin,
ReplyDeleteobviously they ran off the wort between mashes.
So, I'm going to go ahead and ask: Is the boil length supposed to be 75 or 90 minutes long?
ReplyDeletePisshead Philistine,
ReplyDelete75 minutes.
Is there any connection with Reid's of London and reid's (also Read's) of Dublin There were Reads brewing in Dublin 1750-1890. They were also involved in Malting. They were among the early stout brewers in Dublin and breweries at several sites over the years.
ReplyDeleteEddie,
ReplyDeletethis is Reid of London. Of the Griffin Brewery, Clerkenwell. Don't think there's any connection with the Dublin firm.
I have an old bottle opener of a type made from 1924 with Reid's Ale on it. Any thoughts on when it might have been produced?
ReplyDelete